Sign InTry Free

TiDB Deployment FAQs

This document summarizes the FAQs related to TiDB deployment.

Operating system requirements

What are the required operating system versions?

Linux OSVersion
Red Hat Enterprise Linux7.3 or later 7.x releases
CentOS7.3 or later 7.x releases
Oracle Enterprise Linux7.3 or later 7.x releases
Amazon Linux2
Ubuntu LTS16.04 or later

As an open source distributed NewSQL database with high performance, TiDB can be deployed in the Intel architecture server and major virtualization environments and runs well. TiDB supports most of the major hardware networks and Linux operating systems. For details, see Official Deployment Requirements for deploying TiDB.

A lot of TiDB tests have been carried out in CentOS 7.3, and many deployment best practices have been accumulated in CentOS 7.3. Therefore, it is recommended that you use the CentOS 7.3+ Linux operating system when deploying TiDB.

Server requirements

You can deploy and run TiDB on the 64-bit generic hardware server platform in the Intel x86-64 architecture. The requirements and recommendations about server hardware configuration for development, testing and production environments are as follows:

Development and testing environments

ComponentCPUMemoryLocal StorageNetworkInstance Number (Minimum Requirement)
TiDB8 core+16 GB+SAS, 200 GB+Gigabit network card1 (can be deployed on the same machine with PD)
PD4 core+8 GB+SAS, 200 GB+Gigabit network card1 (can be deployed on the same machine with TiDB)
TiKV8 core+32 GB+SAS, 200 GB+Gigabit network card3
TiFlash32 core+64 GB+SSD, 200 GB+Gigabit network card1
TiCDC8 core+16 GB+SAS, 200 GB+Gigabit network card1
Total Server Number6

Production environment

ComponentCPUMemoryHard Disk TypeNetworkInstance Number (Minimum Requirement)
TiDB16 core+48 GB+SAS10 Gigabit network card (2 preferred)2
PD8 core+16 GB+SSD10 Gigabit network card (2 preferred)3
TiKV16 core+64 GB+SSD10 Gigabit network card (2 preferred)3
TiFlash48 core+128 GB+1 or more SSDs10 Gigabit network card (2 preferred)2
TiCDC16 core+64 GB+SSD10 Gigabit network card (2 preferred)2
Monitor8 core+16 GB+SASGigabit network card1
Total Server Number13

What's the purposes of 2 network cards of 10 gigabit?

As a distributed cluster, TiDB has a high demand on time, especially for PD, because PD needs to distribute unique timestamps. If the time in the PD servers is not consistent, it takes longer waiting time when switching the PD server. The bond of two network cards guarantees the stability of data transmission, and 10 gigabit guarantees the transmission speed. Gigabit network cards are prone to meet bottlenecks, therefore it is strongly recommended to use 10 gigabit network cards.

Is it feasible if we don't use RAID for SSD?

If the resources are adequate, it is recommended to use RAID 10 for SSD. If the resources are inadequate, it is acceptable not to use RAID for SSD.

  • TiDB has a high requirement on CPU and memory. If you need to enable TiDB Binlog, the local disk space should be increased based on the service volume estimation and the time requirement for the GC operation. But the SSD disk is not a must.
  • PD stores the cluster metadata and has frequent Read and Write requests. It demands a high I/O disk. A disk of low performance will affect the performance of the whole cluster. It is recommended to use SSD disks. In addition, a larger number of Regions has a higher requirement on CPU and memory.
  • TiKV has a high requirement on CPU, memory and disk. It is required to use SSD.

For details, see Software and Hardware Recommendations.

Installation and deployment

For the production environment, it is recommended to use TiUP to deploy your TiDB cluster. See Deploy a TiDB Cluster Using TiUP.

Why the modified toml configuration for TiKV/PD does not take effect?

You need to set the --config parameter in TiKV/PD to make the toml configuration effective. TiKV/PD does not read the configuration by default. Currently, this issue only occurs when deploying using Binary. For TiKV, edit the configuration and restart the service. For PD, the configuration file is only read when PD is started for the first time, after which you can modify the configuration using pd-ctl. For details, see PD Control User Guide.

The monitoring machine is recommended to use standalone deployment. It is recommended to use an 8 core CPU with 16 GB+ memory and a 500 GB+ hard disk.

Why the monitor cannot display all metrics?

Check the time difference between the machine time of the monitor and the time within the cluster. If it is large, you can correct the time and the monitor will display all the metrics.

What is the function of supervise/svc/svstat service?

  • supervise: the daemon process, to manage the processes
  • svc: to start and stop the service
  • svstat: to check the process status

Description of inventory.ini variables

VariableDescription
cluster_namethe name of a cluster, adjustable
tidb_versionthe version of TiDB
deployment_methodthe method of deployment, binary by default, Docker optional
process_supervisionthe supervision way of processes, systemd by default, supervise optional
timezonethe timezone of the managed node, adjustable, Asia/Shanghai by default, used with the set_timezone variable
set_timezoneto edit the timezone of the managed node, True by default; False means closing
enable_elkcurrently not supported
enable_firewalldto enable the firewall, closed by default
enable_ntpdto monitor the NTP service of the managed node, True by default; do not close it
machine_benchmarkto monitor the disk IOPS of the managed node, True by default; do not close it
set_hostnameto edit the hostname of the managed node based on the IP, False by default
enable_binlogwhether to deploy Pump and enable the binlog, False by default, dependent on the Kafka cluster; see the zookeeper_addrs variable
zookeeper_addrsthe ZooKeeper address of the binlog Kafka cluster
enable_slow_query_logto record the slow query log of TiDB into a single file: ({{ deploy_dir }}/log/tidb_slow_query.log). False by default, to record it into the TiDB log
deploy_without_tidbthe Key-Value mode, deploy only PD, TiKV and the monitoring service, not TiDB; set the IP of the tidb_servers host group to null in the inventory.ini file

How to separately record the slow query log in TiDB? How to locate the slow query SQL statement?

  1. The slow query definition for TiDB is in the TiDB configuration file. The slow-threshold: 300 parameter is used to configure the threshold value of the slow query (unit: millisecond).

  2. If a slow query occurs, you can locate the tidb-server instance where the slow query is and the slow query time point using Grafana and find the SQL statement information recorded in the log on the corresponding node.

  3. In addition to the log, you can also view the slow query using the ADMIN SHOW SLOW command. For details, see ADMIN SHOW SLOW command.

How to add the label configuration if label of TiKV was not configured when I deployed the TiDB cluster for the first time?

The configuration of TiDB label is related to the cluster deployment architecture. It is important and is the basis for PD to execute global management and scheduling. If you did not configure label when deploying the cluster previously, you should adjust the deployment structure by manually adding the location-labels information using the PD management tool pd-ctl, for example, config set location-labels "zone,rack,host" (you should configure it based on the practical label level name).

For the usage of pd-ctl, see PD Control User Guide.

Why does the dd command for the disk test use the oflag=direct option?

The Direct mode wraps the Write request into the I/O command and sends this command to the disk to bypass the file system cache and directly test the real I/O Read/Write performance of the disk.

How to use the fio command to test the disk performance of the TiKV instance?

  • Random Read test:

    ./fio -ioengine=psync -bs=32k -fdatasync=1 -thread -rw=randread -size=10G -filename=fio_randread_test.txt -name='fio randread test' -iodepth=4 -runtime=60 -numjobs=4 -group_reporting --output-format=json --output=fio_randread_result.json
    
  • The mix test of sequential Write and random Read:

    ./fio -ioengine=psync -bs=32k -fdatasync=1 -thread -rw=randrw -percentage_random=100,0 -size=10G -filename=fio_randread_write_test.txt -name='fio mixed randread and sequential write test' -iodepth=4 -runtime=60 -numjobs=4 -group_reporting --output-format=json --output=fio_randread_write_test.json
    

What public cloud vendors are currently supported by TiDB?

TiDB supports deployment on Google GKE, AWS EKS, and Alibaba Cloud ACK.

In addition, TiDB is currently available on JD Cloud and UCloud, and has the first-level database entries on them.

Download PDFRequest docs changes
Was this page helpful?
Open Source Ecosystem
TiDB
TiKV
TiSpark
Chaos Mesh
© 2022 PingCAP. All Rights Reserved.